Crafco Model 30 Pavement Router

Specifically designed to effectively rout random cracks and joints

Engineered Performance

Routed cracks stay sealed three to four times longer than cracks that are not

Descripción

router 30

The Crafco Model 30 Pavement Router has been the industry standard for twenty-five years. There is no other Pavement Router that can match the quality, reliability, long term performance and features of the Crafco Model 30. It's lightweight mobile design, unique center of axis and cutter head alignment enables it to produce unmatched crack following accuracy. There is no better way to effectively and efficiently create sealant crack reservoirs than with the Crafco Model 30 Pavement Router, the most popular Pavement Router throughout the world.

Self Propelled Option

spclose-up This revolutionary option for the Model 25 Pavement Router will self-propel the cutter from crack to crack with the touch of the finger tip control. The struggle to move the cutter uphill, up inclines (road crowns) and from crack to crack is eliminated. Simply engage the wheel drive power and the cutter moves effortlessly to wherever it is needed. This new mobility option is ideal for propelling the pavement cutter up and down loading ramps with little effort. The self-propelled option greatly increases productivity and decreases operator fatigue.

Cortadores

Pavement Cutters and Cutter Configurations

cutter-wobble

The wide hub cutter produces a
cleaner cut, reduces spalling,
eliminates wobble, reduces machine
vibration, and creates less pin wear.
Now standard equipment on all new
Crafco Routers.

Part number 31145



31134 Steel Cutter	31135 Wide Cut Cutters 31150 Extended Life Wide Cut Cutter	31136-7 Carbide Cutter 31149 Extended Life Cutter	31138-6 1/2" Carbide Cutter
Place in line with six spacers on each side. The cut will be approximately 1/2 inch wide. Use until needed depth cannot be reached any longer, then discard. Use on AC pavement or PCCP. Some spalling can be expected.	These cutters provide a cut width that can be adjustedfrom 1/2 inch to two inches. These cutters have no shoulders allowing a more exact cut width. All cutter blades must be evenly placed for proper balance and must have the proper number of spacers to keep cutters snug. Use on AC pavement or PCCP. Some spalling can be expected.	Place six spacer on each side for a 1/2 inch wide cut, Stack two cutters side by side with three spacers on each side, or stagger in a 2-1-2-1-2-1 configuration for a 1.3 inch wide cut. You can also use three cutters side-by-side for a two inch wide cut. Always stack or stagger in a balanced manner. These cutters can be used on AC pavement or PCCP. Some spalling can be expected.	These cutters are the same as the 31136-7 cutter except they have an increased cut depth up to two inches. Three cutters are evenly spaced on the cutter head leaving every othre pin empty.